Part 3 · Course

EE377 ELECTRICAL POWER ENGNRNG

Electrical Engineering and Computer Science · 3 versions

Offerings are listed from 2027-1 Fall through 2031-1 Fall.

EE377 ELECTRICAL POWER ENGNRNG

  • 3.0 credit hours
  • (BS=0.0, ET=3.0, MA=0.0)
  • Version 2026-1
  • In effect
Scope
This course provides a study of the fundamentals in three areas of electric
power engineering: electromechanical energy conversion, electric power systems, and power electronics. Steady-state behavior in single-phase and balanced three-phase power circuits is emphasized. Transformers, AC & DC machines, transmission lines, power systems, power electronic devices, and electrical safety are studied. Laboratory exercises demonstrate the electrical, mechanical, and physical characteristics of several of the systems studied.
Lessons
36 @ 55 min (2.500 Att/wk)
Labs
4 @ 120 min
Special requirements
Computer-aided analysis of a small power system is included.
Prerequisites
one of
EE377 version 2026-1 offerings
Term Sections Section size Capacity Enrolled Wait list Seats Closed Details
2027-1 Fall 1 18 18 15 0 3 No Hours for 2027-1 Fall
2027-2 Spring 1 18 18 18 0 0 No Hours for 2027-2 Spring
2027-8 Fall Exch 1 18 18 1 0 17 No Hours for 2027-8 Fall Exch
2028-1 Fall 1 18 18 17 0 1 No Hours for 2028-1 Fall
2028-2 Spring 1 18 18 16 1 2 No Hours for 2028-2 Spring
2029-1 Fall 2 18 36 33 0 3 No Hours for 2029-1 Fall
2029-2 Spring 1 18 18 7 0 11 No Hours for 2029-2 Spring
2029-8 Fall Exch 1 18 18 0 0 18 No Hours for 2029-8 Fall Exch
2030-1 Fall 1 19 19 0 0 19 No Hours for 2030-1 Fall
2030-2 Spring 1 19 19 0 0 19 No Hours for 2030-2 Spring
2030-8 Fall Exch 1 18 18 0 0 18 No Hours for 2030-8 Fall Exch

EE377 ELECTRICAL POWER ENGNRNG

  • 3.0 credit hours
  • (BS=0.0, ET=3.0, MA=0.0)
  • Version 2012-2
  • Archived
Scope
This course provides a study of the fundamentals in two areas of electric
power engineering: electromechanical energy conversion and electric power systems. Steady-state behavior in single-phase and balanced three-phase power circuits is emphasized. The concept of per unit analysis is introduced and used throughout the course. Transformers, AC & DC machines, transmission lines, power systems, power electronic devices, and renewable energy sources are studied. Laboratory exercises demonstrate the electrical, mechanical, and physical characteristics of several of the systems studied. The cadet will apply analysis, design, build, and/or test techniques to a power related project.
Lessons
36 @ 55 min (2.500 Att/wk)
Labs
4 @ 120 min
Special requirements
Computer-aided analysis of a small power system is included.
Prerequisites
one of

EE377 ELECTRICAL POWER ENGNRNG

  • 3.0 credit hours
  • (BS=0.0, ET=3.0, MA=0.0)
  • Version 1991-2
  • Archived
Scope
This course provides a study of the fundamentals in two areas of electric power engineering: electromechanical energy conversion and electric power systems. Steady-state behavior in single-phase and balanced three-phase power circuits is emphasized. The concept of per unit analysis is introduced and used throughout the course. Transformers, AC & DC machines, transmission lines, power systems, and power electronic devices are studied. Laboratory exercises demonstrate the electrical, mechanical, and physical characteristics of several of the systems studied. The cadet will apply analysis, design, build, and/or test techniques to a power related project.
Lessons
36 @ 55 min (2.500 Att/wk)
Labs
4 @ 120 min
Special requirements
Computer-aided analysis of a small power system is included.
Prerequisites
one of
Back To Top